Carboline Paint is certified for ISO19001:2015, IMO(International Marine Organization), UL(Underwriters Laboratories), FM(Factory Mutual), ANSI Standard 61/NSF, NOSOK M-501(Offshore Exposure), BNV(Det Norske Veritas), LRS(Llyod's Register of Shipping), ABS(American Bureau of Shipping), ASME NQA-1(Nuclear), 10 CFR 50(Nuclear)/Appendix B, and many regional and local certification specific to potable water, bridges, food-grade handling, and processing.
Carbocoat 150 UP is a phenolic modified alkyd primer. It is a heavy-duty primer formulated to provide long-term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds. It is heavy metal free & accepts a wide range of top coats
Carbocrete Sealer WB is an acrylic siloxane sealer for concrete. It is a self-priming, clear liquid, water-repellant sealer for industrial use that penetrates concrete & masonry. The treated surface will have greatly improved resistance to penetration of salts, water, oils, and other contaminants. It is recommended for the protection of masonry & concrete surfaces from chloride penetration, such examples are exterior walls, bridge decks, roadway, median barrier, bridge pier, highway concrete, etc.
Carboguard 60 is a epoxy polyamide primer. It is a high solid, versatile, abrasion resistant, chemical resistant, corrosion-resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. It has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance & fabrication shop applications.
Finish : Semi Gloss
Carboguard 890 is a cycloaliphatic amine epoxy. Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. It is self-priming & suitable for application over most existing coatings & tightly adherent rust.
It serves as stand-alone system for a variety of chemical environments & is also designed for various immersion conditions.
Finish : Gloss
Carboquard 893 SG is a zinc phosphate epoxy polyamide. It is a versatile corrosion-resistant coating to be used either as primer, intermediate, or self-priming finish over steel & zinc primers. It has surface-tolerant properties. It can also be coated with acrylics, epoxies, alkyds, or polyurethanes depending on exposure & needs.
Finish : Eggshell
Carbomastic 15 is an epoxy mastic primer & finish. It is an aluminum flake pigmented, low stress, high solids mastic with a proven field history. It provides unmatched levels of barrier protection & corrosion resistance over existing finishes, & rusted or SSPc-SP2 cleaned steel. It is an excellent choice for field touch up of zinc-rich primers & galvanized steel. It is suitable for use under insulation on hot surfaces operating up to 150 C.
Carbomastic 90 is a cycloaliphatic amine epoxy. It is an economical, self-priming, aluminum pigmented mastic with excellent performance properties. It provides good corrosion resistance, good film build even at edges, surface tolerance & fast curing. It is also suitable as a tie coat or top coat over most tightly adhered existing coatings.
Finish : Flat
Carbomastic 615 is an phenalkamine epoxy. It is a self-priming, high-performance epoxy that has excellent resistance to fresh & saltwater exposures. It exhibits outstanding moisture & surface tolerance during application, low-temperature cure capability, and a very fast cure response for a quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance file strength & performance. It is ideal for industrial or heavy-duty marine environments for the protection of steel against salt-laden environments, freshwater & saltwater immersion.
Finish : Semi Gloss
Carbothane 134 HG is a aliphatic acrylic polyurethane. It is a thin film, high gloss finish with exceptional weathering performance characteristics. It is used in many industrial markets, it provides a smooth, durable finish that has superior resistance to corrosion, abrasion, impact, weather & chemical exposure. It has a wide range of colors including metallic pigmented colors.
Finish : Gloss
Carbotherm 3300 is a waterborne ceramic blend, heat insulative acrylic. It is a ceramic blend insulative composite coating formulated in a high-temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It has zero VOC and also inhibits heat transfer into or out of a structure. Its insulative properties keep structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment. It has anti-condensation properties. Suitable primers include Carbomastic 15.
Finish : Eggshell
Carboweld 11 WB is a water-based inorganic zinc primer. It is a self-curing, fast curing, water-based inorganic zinc-rich primer that protects steel galvanically, eliminating sub-film corrosion. It may be used as a weldable pre-construction primer or as a primer under many different types of topcoats.
Finish : Flat
Carbozinc 11 is a solvent based inorganic zinc primer. It is time tested rapid cure, corrosion-resistant primer that protects steel galvanically in the harshest environments. For over 5 decades, it has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.
Finish : Flat
Carbozinc 608 HB is a flake reinforced phenalkamine epoxy zinc. It is moisture tolerant, fast curing, contains micaceous iron oxide (inert flake reinforcement), high build zinc-rich primer. It is ideal for industrial & marine environments to provide galvanic corrosion protection for steel. It can be applied as a two-coat system with a finish coat of epoxy, polyurethane, etc. Its fast cure properties make it ideal for shop & field applications where quick throughput & turnaround times are desired.
Finish : Flat.
Phenoline 187 VOC is a polyamine cured modified epoxy phenolic. It is self-priming, high solids epoxy lining with exceptional chemical resistance. It is recommended for storage of crude oil (82 C), demineralized water (65 C), tap water (93 C), food & beverage industries, water & wastewater exposures. It is excellent as a protective coating under insulation, operating at 204 C continuously, with outstanding resistance to wet/dry cycling conditions at these elevated temperatures.
Finish : Semi Gloss
Phenoline Tank Shield FP is a solvent-free amine adduct cured epoxy. It is a self-priming, solvent-free, high-performance epoxy coating specifically designed as a pit filling primer with ideal flow properties allowing it to wet out & fill moderate to severe pitting on steel tank bottoms. It can handle exposures typically seen in the oil & gas industries: resistant to crude oil, NGL, condensates, produced water, brines, industrial process water.
Plasite 3073 is a acid-resistant phenolic lining. It is a self priming, high solids phenolic lining offering superior resistance to acids, chemicals, solvents & salts. It has excellent thermal shock resistance & resistant to concentrated sulfuric acid. It conforms to FDA Title 21 CFR 175.300 criteria for food contact.
Finish : Egg Shell
Plasite 9060 is a chemical resistant modified epoxy amine cured. It is a self-priming, non-toxic, high solids modified epoxy cure with an amine adduct curing agent. It has excellent overall chemical resistance to a wide range of acids, alkalis & solvents. It conforms to FDA 21 CFR 175.300 criteria for food contact.
Pyrocrete 241 is a fireproofing cement. It is high density cementitious fireproofing designed for the fire protection of exterior & interior structural steel. It provides both hydrocarbon & cellulosic fire protection for structural steel. It can also be used to upgrade the fire resistance of existing concrete. It is nonflammable, cryogenic protection against LNG spills & immersion exposures. It is recommended for refineries, petrochemical, pharmaceutical facilities, pulp & paper mills, offshore platforms, nuclear & conventional power plants, factories, warehouses, institutional & biomedical facilities.
Finish : Textured
Thermaline 4700AL is a heat resistant silicone. It is a single component, high-performance silicone finish for areas exposed to extreme temperatures ranging from 204 C to 538 C. It requires heat curing.
Color : Aluminum
Finish : Gloss
Thermo-Lag 3000-SP is a fire protection intumescent coating. It is a petrochemical grade, 95% solids epoxy-based intumescent fireproofing coating with a max 4-hour fire rating. It provides a hard, durable finish resistant to normal wear. It is recommended for fireproofing of steel beams, columns, tubes, pipes, vessel skirts, bulkheads, underdecks & electrical raceways.
Finish : Textured
We supply Carboline coating, Carbocoat 150 UP, Carbocrete Sealer WB, Carboguard 890, Carbomastic 90, Carbothane 134 HG, Carbotherm 3300, heat insulative coating, Carboweld 11 WB, Carbozinc 11, Phenoline 187 VOC, Phenoline Tank Shield FP, Plasite 3073, Pyrocrete 241 fireproofing cement, Thermaline 4700AL, heat resistant silicone, Thermo-Lag 3000-SP, intumescent coating, fire protection coating.
Locations we supply to : Jakarta, Bandung, Bogor, Cianjur, Garut, Tasikmalaya, Sukabumi, Cilacap, Tangerang, Serang, Cilegon, Merak, Lampung, Padang, Bengkulu, Palembang, Pekanbaru, Dumai, Batam, Jambi, Medan, Aceh, Bekasi, Karawang, Cikampek, Purwakarta, Indramayu, Cirebon, Tuban, Gresik, Semarang, Malang, Surabaya, Surakarta, Solo, Yogyakarta, Banyuwangi, Bali, Makassar, Balikpapan, Samarinda, Bontang, and other towns in Indonesia.
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy