Hempel Paint helps minimize maintenance cost, improve aesthetics, minimize waste and increase energy efficiency by ensuring your assets are well protected extending their lifespan. Hempel Paint has been used in various industries such as Oil & Gas, Wind, Container, Infrastructure, Industrial, Yacht, Marine, and Thermal Power.
It is a quick drying clear urethane alkyd finish for new wood, varnished wood both interior & exterior.
Color : Clear
Packing : 5L can
It is a polyurethane varnish with excellent gloss retention & good resistance to abrasion, water, sunlight, weather & wear.
It is suitable for interior & exterior wood & other substrates.
Color : Clear
Packing : 5L can
It is a low viscosity epoxy varnish with good penetration properties. It can be applied onto cleaned concrete surfaces before application of pigmented paints.
Colour. : Clear
Packing : 5L can
Hempel Thinners is specifically designed to be used with the Hempadur range of coatings. Hempel Thinners can also be used to clean up brushes and other painting tools as well as surfaces where paint may have splashed.
Color: Transparent
Packing : 5L can; 20L pail
10220 Hempinol is a physically drying, high build bituminous coating. For economical short to medium term anti-corrosive protection of interior & exterior steel exposed to direct sunlight. It is approved as a low flame spread material.
Colour. : Black
Packing : 5L can; 20L pail
12050 Hempalin Primer is a quick drying alkyd primer with zinc phosphate. It is used for the protection of steel in mild to medium atmospheric corrosive environments.
The maximum drying exposure is 120 °C.
Color : Brown, Green
Packing : 5L can; 20L pail
120SG Hempel’s Fast Drying Primer is a urethane modified alkyd based primer. A general purpose primer or intermediate for the protection of steel in mild to medium atmospheric corrosive environments. The maximum drying exposure is 120 °C.
Color : Grey, Green, Red
Packing : 5L can; 20L pail
13140 Hempel’s Uni-Primer Is a quick drying modified epoxy ester primer with zinc phosphate. It is a versatile primer on steel & metal surfaces in mild to medium corrosive atmospheric environment. The maximum dry exposure is 140 °C.
Color : Red
Packing : 20L pail
13624 Hempaquick Primer Is a very quick drying zinc phosphate alkyd primer. It is a workshop primer for temporary protection & as a general purpose primer in fast drying alkyd based system in mild to medium atmospheric corrosive environments.
Color : Grey, Red
Packing : 20L pail
136ID Hempel’s Primer is s a fast drying primer, based on stryrenated alkyd, with excellent rust preventing properties.
Color : Black, Grey, Red
Packing : 20L pail
15275 Hempel’s Shopprimer E Is a zinc phosphate pigmented epoxy poluamide shop primer. It is used a shop primer for protection of blast cleaned steel plate & other structural steel during the storage & building period. The maximum dry exposure is 140 °C.
Color : Red
Packing : 20L pail
15300 Hempadur Primer had been phased out.
Use 15552 Hempadur instead.
15341 Hempadur Zinc Is a polyamide cured zinc epoxy paint. It is for on-line application on containers.
It maybe be used as zinc epoxy for other purposes.
The maximum dry exposure is 140 °C.
Color : Grey, Red
Packing : 20L pail
15360 Hempadur Zinc is a weather-resistant polyamide cured zinc-rich primer. It is for on-line applications on containers. It may also be used as a zinc rich epoxy primer for other purposes. It is approved as a welding primer by Lloyd’s Register of Shipping. It complies with SSPC Paint 20, type 2, level 2 & ISO 12944-5.
Color : Metal Grey
Packing : 10L can
It complies to SSPC Paint 20, type 2, level 2 & ISO 12944-5 is a chemical resistant amine adduct cured epoxy. It is used as a cargo tank lining. It is tested for non-toxicity of welding fumes by the Danish Welding Institute. It is tested according to section 175.300 of the Code of Federal Regulations Title 21 – Liquid Foodstuff. Its maximum water-wet surface temperature is 50 °C. The maximum dry exposure is 140 °C.
Color : White, Light Red
Packing : 20L pail
15460 Hempadur is amine adduct curing, epoxy coating with excellent resistance to a wide range of chemicals.
It is recommended as a tank lining with chemical resistant, for grey/ black water, brine, drilling mud, fish (RSW) tanks etc.
This product is approved according to PSPC requirements based on crossover testing over a wide range of shopprimers.
Dry exposure temperature is max 140 C.
Color : grey, light red
Packing : 20L pail
15553 Hempadur is abrasion & impact-resistant zinc phosphate epoxy paint. It is used as a primer on hot-dipped galvanized surfaces, aluminium & stainless steel in moderately corrosive environments.
It complies with European Fire Standard EN 13501-1; classification B-s1, d0.
It is approved as a low flame spread material when used as part of a predefined paint system, and complies with EU Directive 2004/42/EC: subcategory j.
Color : Off White, Red
Packing : 20L pail
15570 Hempadur Is a highly corrosive resistant polyamide adduct cured epoxy paint. It is used as a maintenance & repair primer, intermediate and/or finishing coat in sever corrosive environment. The micaceous iron oxide pigmented reddish grey 12430 shade is also well suited for application under humid conditions, on damp steel surfaces, and may be applied on moist surfaces. It complies with European Fire Standard EN 13501-1; classification B-s1, d0 and approved as a low flame spread material when used as part of a predefined paint system. It also complies with EU Directive 2004/42/EC: subcategory j. The maximum dry exposure is 140 °C.
Color : Grey, Reddish Grey
Packing : 20L pail
15590 Hempadur is a high abrasion resistant epoxy primer. It is used as a blast primer for heavy duty epoxy system on submerged & non-submerged areas.
The maximum dry exposure is 140 °C.
Color : Red
PAcking : 20L pail
15700 Hempel’s Galvosil is a weathering, abrasion & chemical resistant inorganic zinc silicate primer. It is solvent borne, self curing, inorganic zine silicate heavy duty rust preventing primer with excellent chemical resistance with pH range 6-9. It also offers cathodic protection of local mechanical damage.It complies with SSPC-Paint 20, type 1, level 1 and ISO 12944-5. It is resistant to dry temperature max 400 °C (cyclic); max 500 °C (non-cyclic).
Color : Metal Grey
Packing : 7.8L can
15780 Hempel’s Galvosil is a medium zinc, inorganic zinc silicate general purpose primer. It is used as a general purpose rust preventing primer for steel exposed to moderately to severely corrosive environment.
It complies with SSPC-Paint 20, type 1, level 2.
It is resistant to dry temperature max 400 °C (cyclic); max 500 °C (non-cyclic).
Color : Metal Grey
Packing : 10L can
15790 Hempel’s Galvosil is a medium zinc, inorganic zinc silicate general purpose primer.
It is used as a general purpose rust preventing primer for steel exposed to moderately to severely corrosive environment.
It complies with SSPC-Paint 20, type 1, level 3.
Color : Metal Grey
Packing : 10L can
15890 Hempel’s Shop Primer ZS is a solvent borne zinc ethyl silicate shop-primer. It is approved as welding primer / shopprimer for short to medium term protection of abrasive blast cleaned steel plates & other structural steel during storage, fabrication & construction periods. It is excellent resistance to weathering, oil & organic solvents, heat. Complies to IMO MSC.215(82) as shopprimer for ballast tank coating systems. Complies to IMO MSC.288(87) as shopprimer for cargo oil tank systems. The maximum dry exposure is 120 °C.
Color : Metal Grey
Packing : 15L pail
15ASG Hempel’s 15ASG is a abrasion resistant anti corrosive, pure epoxy primer.
It is used a self-primed high performance coating system for atmospheric or in water service, including water ballast tanks; for tugs & barges.
Excellent anticorrosive & very good mechanical properties.
The maximum dry exposure is 120 °C.
Color : Black, Brown
Packing : 5L can; 20L can
16490 Hempel’s Zinc Primer is a high zinc content, high molecular weight and quicck drying phenotype coating.
It is used as a protective primer on steel in severely corrosive environment; for repair of galvanized steel; for repair of Galvosil & other zinc rich coatings. It complies to SSPC-Paint 20, type 2, level 3.
The maximum dry exposure is 120 °C.
Color : Metal Grey
Packing : 4L can
16900 Hempel’s Silicone Zinc is a heat resistant zinc pigmented silicone primer.
It is used as a primer for long time corrosion protection of steel exposed to high temperature up to 400 °C dry.
It complies with EU Directive 2004/42/EC: subcategory j.
Color : Metal Grey
Packing : 4L can
17360 Hempadur Zinc Is a hard wearing, weather ressitnat zinc rich epoxy primer. It is VOC compliant, versatile, long term primer on steel for epoxy, vinyl & acrylic coating systems in medium to severely corrosive environments. It offers cathodic protection of local mechanical damage. It complies with SSPC-Paint 20, type 2, level 2 and ISO 12944-5. The maximum temperature of dry exposure is 160 °C.
Color : Metal Grey
Packing : 10L pail
1736G Hempadur Avantguard 750 is an activated zinc rich epoxy primer.
It is a versatile primer for long term protection of steel in severely corrosive environments. It has good mechanical strength, also in cyclic temperatures, with improved crack resistance through high flexibility & self-healing of micro cracks.
It is in compliance with ISO 12944 Part 5, 2007; SSPC Paint 20, 2002, level 2, type II.
The maximum temperature for dry exposure is 160 °C.
Color : Metal Grey
Packing : 10L pail
17630 Hempadur is an abrasion, seawater & oil resistant poly aide adduct cured epoxy.
It is used as a self-primed coating for ballast water tanks; primer for atmospheric or in water service, like ship hulls etc.
It is tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.
The maximum dry exposure temperature is 120 °C.
Color : Grey, Red
Packing : 20L pail
17634 Hempadur Quattro is an anti corrosive universal epoxy paint. It is a self primed high performance coating system for atmospheric or in water services, including water ballast tanks & cargo oil tanks to be coated according to IMO-PSPC requirements.
It complies with Section 175.300 of the Code of Federal Regulations Title 21 – Dry Foodstuff. It is tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain.
The maximum dry exposure temperature is 120 °C.
Color : Beige, Red
Packing : 5L can; 20L pail
35560 Hempadur is a solvent free, high build, self-primed, polyamide adduct cured epoxy paint with good resistance to fresh water.
It is recommended as a lining for potable water tank, pipeline & for areas subject to abrasion and/or to a highly corrosive environment, e.g. splash zones, jetty, bridge pilings & decks.
Dry exposure max 140 C.
Color : Cream, Light Red
Packing : 19.4L pail
35870 Hempadur Multi Strength GF is glass flakes reinforced amine adduct cured epoxy coating. It is a hard, impact & abrasion resistant coating with good resistant to sea water, mineral oils, aliphatic hydrocarbons & splashes from petrol & related products. It is a self-primed, high build coating primarily for areas subject to abrasion and/or highly corrosive environment, like splash zones, jetty piles & working decks.
It can be used as interior lining for crude oil & fuel oil storage tanks. The maximum dry exposure temperature is 140 °C. The maximum submerged in water temperature (with no temperature gradient) is 60 °C.
Color : Grey, Black
Packing : 18L pail
45200 Hempadur Hi Build is a seawater & mineral oil resistant epoxy.
It is a hard & tough coating resistant to seawater, mineral oils & splashes from petrol & related products.
It is tested to Section 175.300 of the Code of Federal Regulations Title 21- Dry Foodstuff.
The maximum dry exposure temperature is 140 °C.
Color : White
Packing : 20L pail
45540 Hempadur Multi Strength is an abrasion & corrosion resistant epoxy. It is self-primed, high build coating for maintenance of splash zone, jetty pilings, ship hull & ballast tanks. It is well suited for application under humid conditions & for early water exposure. The maximum dry exposure temperature is 140 °C.
The maximum submerged temperature in water (with no temperature gradient) is 60 °C.
Color : Off White, Black
Packing : 18L pail
45751 Hempadur Multi Strength is a abrasion & corrosion resistant polyamide epoxy. It is used as a heavy duty coating for areas exposed to abrasion & aggressive corrosive climate such as ramps, ship hulls, holds of bulk carriers, ballast tanks of chemical carriers. The maximum dry exposure temperature is 140 °C. The maximum submerged temperature in water (with no temperature gradient) is 50 °C.
Color : Grey, Black, Red
Packing : 20L pail
45881 Hempadur Mastic is a self primed surface tolerant epoxy.
It is polyamide adduct cured, high solids, high build epoxy that forms hard & tough coating.
It has low VOC & good wetting properties.
The maximum dry exposure temperature is 140 °C.
Color : Wide Selection
Packing : 5L can; 20L pail
45950 Hempaprime Mulit 500 is a fast drying, high solid paint that provides hard wearing & long lasting barrier pretoection under severe corrosive environments.
It meets the requirements of ISO 12944 Part 5, 2019 when used as part of a predefined system.
The maximum dry exposure temperature is 120 °C.
Color : Grey, Off White, Black
Packing : 20L pail
46330 Hempatex Hi Build is a salt water & chemical resistant chlorinated rubber. It is resistant to salt water, splashes of mineral oils, aliphatic solvents & a wide range of chemicals. It is self-primed intermediate or finishing coat on steel structures in moderately to severely corrosive environment, including permanently submerged surfaces. The maximum dry exposure temperature is 80 °C.
Color : Grey, Red
Packing : 20L pail
46410 Hempatex Hi Build is an acrylic resin zinc phosphate paint. It is resistant to saltwater, splashes of aliphatic hydrocarbons, animal & vegetable oils. It is used as a primer, intermediate, or finishing coating in Hempatex systems in moderately corrosive environments. Approved by CSIRO, Australia for carriage of foodstuffs. The maximum dry exposure temperature is 80 °C.
Color : White, Red, Grey
Packing : 20Lpail
47182 Hempadur is an anticorrosive modified polyamide adduct cured epoxy.
It is used for atmospheric & immersion service as a tie coat between epoxy & physically drying coating.
It may also be used as a sealer for old antifoulings. the maximum dry exposure temperature is 80 °C.
Color : Yellowish Grey
Packing : 20L pail
47550 Hempadur Mastic is a self-primed low VOC epoxy. It is a high solids, high build, tough epoxy coating which has good wetting properties. It is for atmospheric service as an intermediate or as a primer in coating systems for new construction & maintenance. It may be used directly on cured zinc silicate (Galvosil products). The maximum dry exposure temperature is 140 °C .
Color : Grey
Packing : 20L pail
51570 Hempel’s Silvium is an oleoresinous aluminium paint. It is a general-purpose aluminium paint with good light reflection & heat resistance. It is used as a finishing coat on steel & woodwork exterior & interior in mild to moderately corrosive environments. It complies with Section 175.300 of Food Additive Regulations (in respect of the carriage of dry foodstuffs) of the Code of Federal Regulations. The maximum dry exposure temperature is 200 °C .
Color : Light Aluminium
Packing : 5L can; 20L pail
52140 Hempalin Enamel is a weather-resistant alkyd enamel coating.
It is flexible & resistant to saltwater, spillage of mineral oil & other aliphatic hydrocarbons. It is used as a finishing coat in alkyd systems on exterior & interior steel & woodwork in mildly to moderately corrosive environments.
The maximum dry exposure temperature is 120 °C .
Color : Wide Selection
Packing : 5L can; 20L pail
538SG Hempel’s Fast Dry Enamel is a quick-drying urethane modified alkyd paint.
It is used as a general-purpose finishing coat, interior & exterior, on steel structures in mild to moderately corrosive atmospheric environments.
Color : White, Grey, Off White, Cream, Blue, Green
Packing : 20L pail
55102 Hempel's Polyenamel is a high gloss acrylic polyurethane enamel. It is used as a glossy decorative finishing coat on a variety of substrates such as steel, aluminum, stainless steel, galvanized steel, fiber glass reinforced polyester, plywood, hardwood etc in severely corrosive atmospheric environments.
It is approved as a low flame spread material when used as part of a predefined paint system.
The maximum dry exposure temperature is 120 °C .
Color : White, Grey, Blue, Green
Packing : 5L can; 20L pail
55210 Hempathane Topcoat is a glossy acrylic polyurethane finish. It is used as a finishing coat for the protection of structural steel in severely corrosive atmospheric environments, where light-fastness & gloss retention is required.
It complies with; the European Fire Standard 13501-1; classification B-s1, d0, and EU Directive 2004/42/EC: subcategory j.
The maximum dry exposure temperature is 120 °C .
Color : Wide Selection
Packing : 5L can; 20L pail
55610 Hempathane HS is zinc phosphate glossy acrylic polyurethane topcoat. It is used as a VOC compliant, high build finishing coat for the protection of structural steel in severely corrosive environments. May be specified as one coat “Direct to Metal” system in C2 & C3 environments.
It complies with EC Directive 2004/42/EC: subcategory j. The maximum dry exposure temperature is 120 °C .
Color : White, Light Grey, Black, Yellow, Green, Red
Packing : 20L pail
56360 Hempatex Enamel is an acrylic resin & non-chlorinated plasticizer finish coat.
It is used as an interior & exterior finish coat in Hempatex systems in moderately to severely corrosive environments.
It is tested for non contamination of grain cargo at the Newcastle Occupational Health. The maximum dry exposure temperature is 80 °C .
Color : Selected Colors
Packing : 20L pail
56540 Hempel’s Hi-Vee is a day light-reflective acrylic paint. It is a non-hiding, strongly day light-reflecting acrylic paint with fluorescent pigments which give an intense color impression & high visibility. It is used for life-saving equipment & warning purposes such as protruding or moving objects. The maximum dry exposure temperature is 80 °C .
Color : Orange
Packing : 5L can
56914 Hempel’s Silicone is a heat-resistant aluminum pigmented polysiloxane paint. It is used for long-term protection of hot pipelines, exhaust pipes, smokestacks & other hot surfaces. It complies with EU Directive 2004/42/EC: subcategory i. The maximum dry exposure temperature is 600 °C .
Color : Light Aluminium
Packing : 4L can
56940 Hempel’s Silicone Acrylic is a heat-resistant acrylic modified polysiloxane paint. It is used for long-term protection of hot pipelines, exhaust pipes, smokestacks & other hot surfaces. The maximum dry exposure temperature is 200 °C .
Color : Light Aluminium, Light Grey
Packing : 5L can; 20L pail
56990 Hempel Versiline CUI is an MIO pigment inorganic copolymer coating. It cures for form an inert polymer matrix able to resist high temperatures & thermal shock/cycling in dry or dry/wet service. It is usedd for long term protection of hot pipework, equipment & other hot surfaces. It is applied directly onto the steel substrate. It conforms to NACE SP0198 – 2010 systems SS-5 and CS-6. The maximum dry or dry/wet exposure temperature is 650 °C .
Color : Dark grey
Packing : 5L can
675SG Hempel’s Anti Slint Powder is anti-skid dried silica sand. It is used to obtain anti-skid properties on decks & other areas.
Color : Grey
Packing : 2.5L can
72900 Hempel’s Antifouling Olympic + acrylic binder is a self polishing antifouling paint. It doesn’t contain organotin compounds acting as biocides. It is for both new buildings & maintenance of underwater hull & boot top for up to 36 months of dry-docking interval. It complies with the International Convention on the Control of Harmful Antifouling System on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).
Color : Black, Red, Brown
Packing : 20L pail
72950 Hempel’s Antifouling Olympic+ acrylic binder is a self-polishing antifouling paint. The patented microfibers give best-in-class mechanical strength to avoid cracking & peeling.
It is for both new buildings & maintenance of underwater hull & boot top for up to 36 months of dry-docking interval.
It complies with the International Convention on the Control of Harmful Antifouling System on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).
Color : Black, Red, Brown
Packing : 20L pail
76110 Hempel’s Antifouling Classic is a soluble matrix type antifouling paint.
It doesn’t contain organotin compounds acting as biocides & complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).
Color : Red
Packing : 5L can; 20L pail
78950 Hempel’s Antifouling Globic 9000 is a nano acrylate technology premium high solid SPC antifouling paint. It is used as an antifouling for bottom & boot top on vessels operating in deep-sea trade at medium to high speed & high activity with short idle periods.
It doesn’t contain organotin compounds acting as biocides & complies with the International Convention on the Control of Harmful Antifouling Systems on Ships as adopted by IMO October 2001 (IMO document AFS/CONF/26).
Color : Red
Packing : 20L pail
85671 Hempadur is a water & chemical resistant amine adduct cured novolac coating. It is used as an interior tank lining, pipelines etc for hot water, brine, crude oil, including potable water tanks. External coating for the protection of insulated (CUI) & uninsulated process pipework & vessels including cryogenic conditions. It is in accordance with ARAMCO’s specification APCS 2A, 2B and 2C and conforms to Norsok M-501, system no. 3. It is approved by Water Research Centre (WRAS), Great Britain, for potable water up to 23 °C and complies with Section 175.300 of the Code of Federal Regulations Title 21 – Liquid and Dry Foodstuffs. The maximum dry exposure temperature is 205 °C, and in water (with a max gradient of 15 °C): the maximum temperature is 95 °C.
Color : Grey, Red
Packing : 20L pail
99610 Hempel’s Tool Cleaner is a blended strong solvent for cleaning tools. It doesn’t contain chlorinated solvent.
It is for cleaning of brushes, paint rollers, spray equipment & other tools which have been used for mixing or application of Hempadur products.
Color : Clear
Packing : 5L can
We supply Hempel Paint and Hempel coating such as antifouling, marine paint, Galvosil, Hempadur, Hempadur Avantguard, Glass Flake, Hempadur Mastic, Hempadur Quattro, Hempalin, Hempaquick, Hempatex, Hempathane, Hempaxane, Hempinol, Olympic, Novolac, Silvium, Versiline.
Locations we supply to: Jakarta, Bandung, Bogor, Cianjur, Sukabumi, Pelabuhan Ratu, Cilacap, Tasikmalaya, Bekasi, Karawang, Cikampek, Cirebon, Indramayu, Lamongan, Gresik, Tuban, Semarang, Surabaya, Malang, Jember, Yogyakarta, Solo, Banyuwangi, Tangerang, Serang, Anyer, Cilegon, Merak, Lampung, Palembang, Padang, Bengkulu, Jambi, Pekanbaru, Dumai, Bangka, Belitung, Batam, Medan, Lhokseumawe, Aceh, Sumatra, Bali, Balikpapan, Samarinda, Bontang, Banjarmasin, Pontianak, Sangatta, Makassar, and other parts of Indonesia.
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy