International Paint has various types of paints such as decorative paint, automotive & specialty coating, industrial coating, marine protective & yacht coating, and powder coating.
Enviroline 225 is a Sulphuric & Hydrochloric acid resistant lining. It is a solvent free polycyclamine cured epoxy novolac lining with excellent resistance tp 98% sulphuric acid, 37% hydrochloric acid, 5% nitric acid, ethanol, butyl acetate, caustic soda and other chemicals.
Color : Grey, Green
Interbond 201 is a hard wearing, surface tolerant, two pack epoxy primer/ finish offering corrosion protection in one coat.
It is used as anti-corrosive primer/ finish for decks, deck fittings and cargo holds.
Colors : storm grey; surf grey; red; signal green
Finish : semi-gloss
Intergard 251HS is a low VOC, high solids, fast curing epoxy primer.
This primer, in combination with approved topcoat, offers good anti-corrosive protection and high durability in medium to high corrosive atmospheric environments up to & including C4 catgory ISO 12944-2.
Colors : red; grey; buff
Intergard 263 is used a tie coat anti-corrosives and either antifoulings or cosmetic finishes to ensure maximum system adhesion and performance on outside shell vessel areas.
Color : light grey
Intergard 269 is suitable for overcoating after prolonged periods of weathering.
It is used as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholding of subsequent high build topcoats.
Color : red
Intergard 400 Is a pure epoxy primer. A two pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods. A general purpose primer for all non-permanently immersed areas.
Color : Dark Grey, Light Grey
Intergard 475HS is used as a high huild epoxy coating to improve barrier protection for a wide range of anti-corrosive coating systems in a wide range of environments including offshore structures, petrochemical plants, pulp and paper mills and bridges.
Color : light grey
Intergard 740 is an epoxy finish. A two-pack epoxy finish being used as a cosmetic finish above the waterline. It has a high gloss finish.
Colors : White, Storm Grey, Red, Signal Green, Black
Interlac 665 is a one pack alkyd. It is used as an easily maintained cosmetic finish coat on areas above the waterline for a new building, maintenance, repair, or onboard maintenance. It has a high gloss finish.
Color : Variety of Colors
Interprime 198 is a one pack alkyd primer. It is a quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes. It is used for maintenance of above water areas. It has a matt finish.
Color : White, Grey, Red
Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating. Available in an aluminium pigmented version to provide additional anti-corrosive barrier protection.
For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.
Semi-gloss finish with varieties of colors
Interline 399 has excellent heat & solvent resistance – suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130 C.
Color : white; blue grey
Interline 850 provides corrosion protection for the internals of steel storage tanks and pipes containing crude oil, unleaded gasoline blends, MTBE, jet fuels, caustic solution, potable water and a selected range of aromatic and aliphatic solvents.
Color : grey; white
Interline 984 is intended as a lining for the protection of ferrous and non-ferrous substrates (including concrete).
Interline 984 is resistant to crude oil temperature up to 90 C.
Color : white; green; yellow
Interline 994 is designed for storage of a range of aggressive chemicals and solvents.
Applications include linings in the oil & gas, chemical, mining & water industries on storage vessels, pressure vessels, interior & exterior of piping and resistance to molten sulfur in the rail industry.
Color : grey; buff
Interline 1064 is primarily intended for the internal lining of chemical storage tanks and vessels where acidic chemicals or hot media are to be stored, such as in oil, gas and chemical processing, pulp & paper plants.
Color : white; grey; buff
Interthane 990 is two pack, acrylic polyurethane finish giving excellent durability and long term re-coatability.
As a cosmetic finish on above water areas. Suitable for use on topsides, external superstructure, external decks and boottops.
Color : wide range selection
Intertherm 50 is a high-temperature resistant silicone (of up to 540°C). It is a single component, high-temperature coating based on moisture-curing silicone binder. The moisture curing cross-linking mechanism allows multiple coats to be applied without heat curing. It is suitable for the protection of steel from corrosions on areas including flare stacks, chimneys, exhausts, vents, and pipework, at temperatures up to 540°C.
Color : Aluminium, Black
Intertherm 875 is a high-temperature resistant silicone acrylic (of up to 260°C). It is a heat-resistant finish based on silicone and acrylic resins. Intertherm 875 has excellent color and gloss retention and maintains flexibility at elevated temperatures. It is suitable for the protection of steel surfaces subject to temperatures up to 260°C at new building, maintenance, repair, or onboard maintenance. It has a gloss finish.
Color : Blue, White
Intertherm 891 is a one pack high Temperature Oleoresinous / Aluminum Coating. It is used as a light-reflective finish for cargo holds, pipes, etc. Intertherm 891 is suitable for use on surfaces that are likely to reach dry heat temperatures of up to 250°C (482°F). This may be extended up to 315°C (600°F) if the dry film thickness is reduced to 15 microns (0.6 mils). It is suitable for use at new building, maintenance, repair, or onboard maintenance.
Color : Aluminum
Intertuf 16 is an economical protection of enclosed steel for behind linings and in cofferdams
Color : black
Intertuf 262 is an epoxy anti corrosive primer.
It is a surface tolerant, two pack epoxy primer. As an epoxy anticorrosive coating for use from Keel to Rail. Suitable for use with controlled cathodic protection, at newbuilding, maintenance & repair or on board maintenance. It has a matt finish.
Color : Red
Interzinc 22 is an inorganic zinc rich silicate primer. A two-component, rapid recoat, fast curing solvent-based inorganic zinc-rich ethyl silicate primer that conforms to SSPC Paint 20 Level 1. It is available in ASTM D520, Type II zinc dust version as standard. It is a zinc-rich primer and is suitable for use for a wide range of high-performance systems and topcoats in both maintenance and new construction of bridges, tanks, pipework, offshore structures, and structural steelwork. It provides excellent corrosion protection for correctly prepared steel substrates, up to temperatures of 540°C (1004°F) when suitably topcoated. It is also a fast curing primer capable of application in a wide range of climatic conditions. It has a matt finish.
Color : greenish grey
Interzinc 52 is a metallic zinc rich epoxy primer which complies with the composition & performance requirements of SSPC Paint 20.
A high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical facilities, pulp & paper plants, bridges & power plants.
Color : grey
Interclene 145 is a conventional, soluble matric TBT free antifouling that provides in-service periods of up to 12 months in a single coat.
Color : red
Interclene 165 is a high strength, traditional TBT free long lift antifouling that provides in-service period of up to 24 months from a single coat.
Color : bright red
Interspeed 376 is a TBT free antifouling paint for aluminum vessel. It is TBT (tributyltin) free with a Controlled Depletion Polymer (CDP) antifouling system. It is suitable for use on aluminum vessels both for both maintenance & repair.
Color : Blue, White, Red, Black, Dark Grey
Interspeed 6200 is a TBT free self-polishing antifouling paint. It is TBT (tributyltin) free, with a Controlled Depletion Polymer (CDP) self-polishing antifouling system. It is suitable for use at new building, maintenance & repair. In repair situations, Interspeed 6200 can be applied directly over existing antifoulings.
Color : Red, Brown
Interswift 6800 HS is TBT free, low friction, self-polishing copolymer antifouling paint. It is Patented, TBT free, low friction, self-polishing antifouling system incorporating unique Copper Acrylate SPC (Self-polishing Copolymer) technology. It is suitable for use at new building, maintenance & repair.
Color : Blue, Green, Red, Brown, Black
Interzone 954 is splash zone coating, splash zone paint, tidal zone coating. Splash zone coating (paint) - Interzone 954 is primarily designed for use in offshore splash zone, tidal zone maintenance. This is because splash zone coating (paint) – Interzone 954 can be applied onto reoxidized and slightly damp surfaces. After application, this splash zone coating (paint) can continue its full curing underwater (submerged conditions). Interzone 954 coating has also excellent cathodic disbondment resistance and performs well under corrosive environments like in the pulp and paper industries, chemical plants, jetties, and slice gates. It has a gloss finish.
Color : Grey, Green
Chartek 7 is an epoxy intumescent fire protection system featuring excellent jet fire resistance, lower applied density and an easier application process. Fireproofing coating (fire proofing paint, fire protection coating) – Chartek 7 is the highest qualified and most cost efficient product for jet fire protection on the market. Jet fire protection coating (fire proofing paint, fire protection paint) – Chartek 7 is certified by ABS, Lloyd’s, listed by Underwriters Laboratories and NORSOK M-501 tested. Chartek 7 is fully fired rate for offshore platform applications. This fire protection coating is easy to apply by a variety of techniques, hard, durable and flexible. This fire protection coating is virtually maintenance free – even in the harshest climatic conditions.
Interchar 1190 is a water borne intumescent fireproofing. It is a single component, borate, and chlorine-free, water-borne intumescent coating designed for on-site application to structural steel required protection from a cellulosic fire up to 2 hours.
Interchar 1190 is a low VOC acrylic intumescent material independently fire tested in accordance with BS 476 Parts 20-22.
Color : white
Interchar 2060 is an acrylic intumescent fireproofing. It is a single component, solvent-borne, borate-free, high solids, low VOC intumescent coating designed to provide cellulosic fire protection to structural steelworks for up to 60 minutes. Interchar 2060 has been independently tested at accredited laboratories to BS 476 Parts 20-22, AS 1530.4-2005, and AS 4100, and third party assessed and certified. It is suitable for both off-site and on-site applications due to its ease of use, fast-drying & handling properties.
Interkote 1460 is a light weight bauxite cement fire protection. It is a light weight, bauxite based cementitious fire protection material. Interkote 1460 systems is suitable for protecting onshore oil, gas & chemical processing facilities, as well as industrial structures. It provides cost effective hydrocarbon pool & jet fire resistance, in accordance with UL 1709, for up to 4 hours.
Packing : 22.2 kg/bag
Interkote1560 is a high density bauxite cement fire protection. It is high-density bauxite-based cementitious fire protection material for onshore oil, gas, petrochemical & power generation industries. It is for in situ applications to pre-erected structures, to provide protection from hydrocarbon pool & jet fires for up to 4 hours.
Packing : 22.2 kg/bag
We supply International marine paint, International protective paint (cat kapal International, Enviroline 225, Interbond 201, Interclene 145 antifouling, Intergard 269, Intergard 400, Intergard 475HS, Intergard 740, Interseal 670 HS, Interprime 198, Intertuf 16, Intertuf 262, Interzinc 22, Interzinc 52, Interlac 665, Interthane 990, Intertherm 50, Intertherm 871, Intertherm 891, Interspeed 376, Interspeed 6200, Interswift 6800 HS, Interzone 964, Chartek 7, Interchar 1190, Interchar 2060, Interkote 1460, Interkote 1560, others) in Jakarta, Bogor, Bandung, Cianjur, Sukabumi, Tasikmalaya, Cilacap, Bekasi, Karawang, Cikampek, Subang, Lamongan, Patimban, Cirebon, Tuban, Gresik, Semarang, Surabaya, Malang, Jember, Banyuwangi, Tangerang, Serang, Cilegon, Merak, Lampung, Palembang, Padang, Bengkulu, Jambi, Pekanbaru, Medan, Lhokseumawe, Aceh, Denpasar, Bali, Balikpapan, Samarinda, Bontang, Banjarmasin, Makassar, and other parts of Indonesia.
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy