Jotun paint is suitable for tank coating, marine vessels & structures made of aluminum, fiberglass, GRP-glass reinforced fabric, timber, stainless steel. Jotun paint is for various protection: acid-resistant, alkaline resistant, temperature resistant up to 1000 C; cold resistant up to minus 196 C, intumescent fireproofing, insulation paint, etc.
Alkyd Primer is an oxidatively drying alkyd primer or mid-coat. It is a protective coating for a wide range of industrial structures, made of carbon steel, aluminum, and wood.
Color : Black, Grey, Red, White
Packing : 5L; 20L
Alkyd High Gloss Finish is an oxidatively drying alkyd high gloss finish coat.
It is suitable for light industry and coastal markets, buildings, and general structural steel.
Color : Various
Packing : 5L; 20L
Alkyd Primer QD is one component, fast drying zinc phosphate primer.
It can be used for properly prepared wooden, aluminum & carbon steel surfaces.
It is recommended for light industry environments, buildings & general structure steels.
Color : red, grey, light grey, black, green, white
Packing : 5L/can; 20L/pail
Alkyd High Gloss QD has high gloss finish with good gloss retention.
It is suitable for light industry & coastal market for both new & maintenance projects.
It is recommended for light industry environments, buildings & general structural steels.
Color : various
Packing : 5L/can; 20L/pail
Aluflex is an alkyd aluminum finish topcoat.
It is recommended for touch-up purposes.
It has certificates from Grain, Newcastle Occupational Health.
Color : Aluminum
Packing : 5L; 20L
Aluminum Paint HR is styrene modified oxidatively drying alkyd coating with heat resistant up to 250C.
It can be used as primer, mid coat or exterior aluminum finish usually within an alkyd system.
It is recommended for exhaust pipes, process piping & engine parts.
Color : aluminum
Packing : 5L/can
Barrier is a zinc rich epoxy primer conforms to the compositional requirements of SSPC Paint 20 Level 2 & complies with ASTM D520 Type II Zinc Dust.
It is suitable for carbon steel, repair of inorganic zinc silicate coating & damaged galvanized steel substrates.
Color : grey
Packing : (3+1)L/set; (6.75+2.25)L/set
Barrier 65 conforms to the compositional requirements of SSPC Paint 20 Level 3 & complies with ASTM D520 Type II Zinc Dust.
It is suitable for structural steel & piping exposed in corrosivity categories up to C5 ISO 12944-2.
It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment & general structural steels.
Color : grey
Packing : (7.2+1.7)L/set
Barrier 77 conforms to the compositional requirements of SSPC Paint 20 Level 2 & complies with ASTM D520 Type II Zinc Dust.
It is suitable for structural steel & piping exposed in corrosion categories up to C5 ISO 12944-2.
It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment & general structural steels.
Color : grey
Packing : (6.75+2.25)L/set
Barrier 80 conforms to the compositional requirements of SSPC Paint 20 Level 2; ISO 12944-5 & complies with ASTM D520 Type II Zinc Dust.
It is heat resistant up to 120C continuous atmospheric exposure.
It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment & general structural steels.
Color : grey
Packing : (3+1)L/set; (6.75+2.25)L/set
Barrier 90 conforms to the compositional requirements of SSPC Paint 20 Level 1; ISO 12944-5; BS 4652; BS 5493; AS/NZS 3750.9.1994 & complies with ASTM D520 Type II Zinc Dust.
It is approved in a range of bridge specifications requiring 90% zinc dust content.
It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment & general structural steels.
Color : grey
Packing : (7.50+1.25)L/set
Chemflake Special is a glass flake reinforced vinyl ester primer, mid coat or finish coat in atmospheric & immersed conditions.
It is designed as an internal lining for offshore, onshore, buried tanks, pipes such as chemical tanks, flue gas ducts, cooling towers, funnels, waste water, grey water, concrete bund, pressure vessels.
Color : red, white
Packing : 16L/pail
Epoxy HR is heat resistant up to 205C & can be applied on hot substrates up to 150C.
It can be used as a primer, mid coat or finish coat.
It is suitable for properly prepared carbon steel, galvanized steel, stainless steel & aluminum substrates.
Color : aluminum, bright aluminum (RAL9006), light grey, red, white.
Packing : (16.3+2.5)L/set
Futura Classic is a high solid product & has a glossy finish with good gloss retention.
It is recommended for topside, deck & superstructure.
Color : wide ranges
Packing : (18+2)L/set
Hardtop Clear is chemically curing aliphatic polyurethane coating with gloss finish & good chemical resistance,
It is used as a clear coat in a polyurethane system or on epoxy / epoxy mastic system.
Color : clear
Packing : (15+5)L/set
Hardtop XP is an acrylic polyurethane gloss topcoat.
It is recommended for offshore environments, refineries, power plants, bridges, and buildings. Suitable for a wide range of industrial structures.
Color : Various
Packing : (4.55+0.45) L/set; (18.2+1.8) L/set
Jotachar 1709 is solvent free amine cured 100% solids epoxy intumescent coating for protection of steel in hydrocarbon pool fires.
It is to be used as a mid coat as part of a complete system in atmospheric environments on approved primers on carbon steel, hot dipped galvanized steel & stainless steel substrates..
It is ANSI/UL 1709 tested & listed by Underwriters Laboratories (UL) for fire durations from 60 to 240 minutes.
Color : grey
Packing : (2.5+2.5) kg/set; (10+10) kg/set; (20+20) kg/set.
Jota-Etch is epoxy modified etch primer containing phosphoric acid suitable for properly prepared galvanized steel, stainless steel & aluminum substrates.
It can be used for general fabrication & OEM equipment.
Color : light grey, yellow, black
Packing : 5L/can; 20L/pail
Jotafloor EP SL Uni is solvent free amine self levelling epoxy with good abrasion, impact, chemical & slip resistant.
It is to be used as mid coat & top coat as part of a complete system suitable for industrial floors, laboratories, hospitals, food & beverage plants, kitchens, high tech manufacturing facilities, dairies, warehouses, loading & unloading areas, hangers.
Color : various selection
Packing : (14+3) L/set.
Jotafloor Sealer is amide cured epoxy primer & exhibits excellent penetration properties to ensure good adhesion on most concrete floors.
It is a sealer for all Jotafloor products & designed for use independently as a dust binder for concrete floors.
Color : transparent
Packing : (4+1) L/set; (16+4) L/set
Jotafloor SL Universal is a 3 component solvent free amine cured self levelling epoxy coating.
It is flexible, abrasion, impact, chemical & slip resistant mid coat.
Color : selected range of colors
Packing : (7.50+3.75+6.75) L/set
Jotafloor Solvent Free Primer is a primer for all Jotafloor products with various levels of mechanical & chemical exposure.
It is recommended for heavy duty traffic areas such as ramps, car parks, parking bays, pedestrian walkways, roof decks & industrial floors.
Color : transparent
Packing : (3.33+1.67) L/set; (13.0+6.5) L/set.
Jotafloor Topcoat is a high performance, good chemical, abrasion & impact resistance.
It is specially designed for floors where a dust free, hard wearing & aesthetically pleasing coating is required.
It is recommended for industrial walkways, stair cases, light duty workshops, internal car park upstands, plant rooms, back of house.
Colour : selected range of colors
Packing : (4+1)L/set; (16+4)L/set
Jotaguard 82 is a high solids, high build & surface tolerant product replacing coal tar epoxy products.
It can be used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed environments.
It is recommended for exterior hull, exterior & interior areas of marine vessels, refineries, power plants, bridges, buildings & mining equipment.
Color : black, brown
Packing : (4.29+0.71) L/set; (17.2+2.8) L/set
Jotamastic 70 is polyamine cured epoxy mastic coating which can be used as primer or mid coat in atmospheric environments.
It is suitable for properly prepared carbon steel & aged coating surfaces.
Color : grey, red, aluminum
Packing : (4.17+0.83) L/set; (15+3) L/set
Jotamastic 80 is a surface tolerant, polyamine cured epoxy mastic coating. Specially designed for areas where optimum surface preparation is not possible.
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment, and general structural steel.
Color : Grey, Green
Packing : (16.0+2.3)L/set
Jotamastic 80 Aluminum is a surface tolerant, high solids product pigmented with aluminum for improved barrier effect.
It is designed for areas where optimum surface preparation is not possible or desired.
It can be used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed environments.
Color : aluminum
Packing : (16.0+2.3) L/set
Jotamastic 90 is surface tolerant, abrasion resistant, high solids, high build product for long lasting protection in high corrosive environments.
It is recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment & general structure steel.
It is approved for PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87); NORSOK System 1 Rev.5; Grain, Newcastle Occupational Health.
Color : black, white, others
Packing : (3.55+1.00) L/set; (15.6+4.4) L/set
Jotatemp 250 is glass flake epoxy composite coating with heat resistant up to 250C & can be applied on hot substrates up to 150C.
It can be used a primer, mid coat or finish coat in atmospheric environments.
It is particularly suited for use under insulation, temperatures ranging from cryogenic, i.e. minus 196C to 250C.
Color : white, red, light grey, aluminum (aluminum color only as finish coat)
Packing : (15+3) L/set
Jotatemp 540 Zinc provides corrosion protect as a single coat and can be used under insulation if overcoated with a high temperature coating designed to offer protection against CUI, up to 540 C.
It conforms to the compositional requirements of SSPC Paint 20 Level 3.
It is suitable for process and piping equipment that exposed to elevated temperatures.
Color : bluish grey
Packing : (8.00+1.32) L/set
Jotatemp 1000 Ceramic is a titanium catalyzed inorganic ceramic copolymer. It is resistant to the low temperature down to – 196 C; and high temperature up to 1000 C continuously, provided substrates allow. It can be applied on hot substrates up to 250 C. It is specially designed for preventing corrosion under insulation (CUI). It can use in combination with Jotatemp 540 Zinc as a primer, providing heat resistance up to 540 C and lasting corrosion protection.
Color : Aluminum
Packing : (4.50+0.04) L/set
Jotatherm TB550 is solvent free amine cured syntactic epoxy insulant that provides thermal insulation & corrosion protection at continuous operating temperatures of -40C to 150C.
It is typically used in the oil, gas & energy industries in combination with Jotachar epoxy passive fire protection.
Color : buff
Packing : (8.8+7.3) kg/set
Marathon is a high solids, high build, glass flake reinforced epoxy with good scratch & abrasion resistant.
It can be used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed environments.
It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and compatible with cathodic protection systems.
Color : selected range of colors
Packing : (15+5) L/set
Marathon 550 is a surface tolerant product that can be applied on moist substrates & continues to cure when immersed in water.
It can used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed environments like in the splash zone or tide zone.
It is for structural steel & piping exposed to severe corrosive environments in offshore environments, refineries, power plants, bridges, buildings, mining equipment.
Color : limited
Packing : (14.4+3.6) L/set
Marathon XHB is a high solids, high build, glass flake reinforced product which has high abrasion resistance suitable for properly prepared carbon steel & concrete substrates.
It is specially suited in areas where high mechanical strength is required & compatible with cathodic protection systems.
It can be used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed environments.
Color : selected range
Packing : (10+5) L/set
Penguard Express is a fast drying, high solids, high build epoxy specially for new construction where short dry to handle & over coating times are required.
It can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments suitable for properly prepared carbon steel, aluminum, concrete & galvanized steel substrates.
It is for structural steel & piping exposed to highly corrosive environments, C5I or C5M ISO 12944-2.
Color : grey, grey XO, red, buff, light red
Packing : (4+1) L/set; (16+4) L/set
Penguard Express MIO is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build epoxy which can be used as a primer, mid coat, finish coat or as single coat system in atmospheric environments.
It is suitable for properly prepared carbon steel, stainless steel, aluminum & concrete substrates.
It is recommended for offshore environments, refineries, power plants, bridges, buildings & mining equipments.
Color : grey, red.
Packing : (4+1) L/set; (16+4) L/set
Penguard FC is high molecular weight epoxy of semi gloss finish that can be used as primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
It is suitable for a wide range of industrial structures for all non immersed areas & sea water immersed areas.
Color : selected range
Packing : (4+1) L/set; (16+4) L/set.
Penguard Midcoat is high solids, high build polyamide cured epoxy to be used as a mid coat in systems for new construction in atmospheric environments.
It is recommended for structural steel & piping exposed to highly corrosive environment C5I or C5M ISO 12944-2 in offshore, refineries, power plants, bridges, buildings & mining equipment.
Color : buff, grey, light red, turquoise, white.
Packing : (4+1) L/set; (16+4) L/set.
Penguard Primer is polyamide cured, high molecular weight epoxy designed as a primer for new construction in atmospheric & immersed environments.
It is suitable for properly prepared carbon steel, stainless steel, aluminum, concrete, galvanized steel, shop primed steel & thermally sprayed zinc substrates.
It has following certifications : Low Flame Spread in accordance with EU Directive for Marine Equipment; approved with Parts 5 and 2 of Annex 1 of IMO 2010 FTP Code.
Color : grey, red.
Packing : (4+1) L/set; (16+4) L/set.
Penguard Tie Coat 100 is specially designed as holding primer, sealer & as a tie coat on top of inorganic zinc silicate primers, galvanized steel & thermally sprayed zinc in atmospheric environments.
It has Pre-qualification testing in accordance with NORSOK M-501 Rev.5, System 1, suitable for exterior exposure in offshore environments below 120C.
Color : red
Packing : (13.0+6.5) L/set.
Penguard Topcoat is polyamide cured epoxy having a glossy finish with fair gloss retention for use as top coat in atmospheric & immersed environments.
It has following certifications : Low Flame Spread in accordance with EU Directive for Marine Equipment; approved with Parts 5 and 2 of Annex 1 of IMO 2010 FTP Code.
It is recommended for topside, deck & superstructure.
Color : various selection
Packing : (4+1) L/set; (16+4) L/set.
Penguard Universal is a fast drying, abrasion resistant, high solids, high build epoxy that can be used as primer, mid coat, finish coat or as single coat system in atmospheric & immersed conditions.
It is suitable for properly prepared carbon steel, galvanized steel, shop primed steel, stainless steel, aluminum & concrete substrates.
It is approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82); PSPC for Crude Oil Tanks according to IMO Res. MSC 288(87); Pre-qualified in accordance with NORSOK M-501 Edition 6 System 1 & System 7.
Color : aluminum, grey & selected range.
Packing : (15+5) L/set
Pilot II is oxidatively drying alkyd top coat which has glossy finish & good gloss retention.
It is to be used as topcoat in atmospheric environments for engines, topside, deck & superstructure.
It has approvals / certificates from : Grain, Newcastle Occupational Health; Food, Compliant with USA, FDA Title21, Part 175.300 for dry solids.
Color : wide selections
Packing : 5 L/can; 20 L/pail.
Pilot QD Primer is a fast drying, high build, zinc phosphate pigmented alkyd primer.
It can be used as primer or mid coat in atmospheric environments suitable for properly prepared carbon steel, aluminum & wooden substrates for a wide range of industrial structures.
It has approvals / certificates from : Grain, Newcastle Occupational Health; Food, Compliant with USA, FDA Title21, Part 175.300 for dry solids.
Color : red, grey, white
Packing : 5 L/can; 20 L/pail.
Pilot WF Primer is a versatile, fast drying water borne acrylic emulsion coating for exterior & interior use.
It is suitable as primer or mid coat in up to moderately corrosive environment for properly prepared carbon steel, stainless steel, aluminum, galvanized steel, shop primed steel, concrete & aged coating surfaces.
It is recommended for industrial structures like airports, buildings, bridges, refineries, petrochemical, chemical plants, accommodation & works spaces, engine rooms.
Color : white, red, grey, grey XO
Packing : 20 L/pail
Pilot WF is a versatile, fast drying water borne acrylic emulsion coating for exterior & interior use with semi gloss finish, good color & gloss retention.
It is suitable as topcoat ins systems for a wide range of industrial structures, structural steel, piling & concrete exposed to corrosivity categories up to C5 ISO 12944-2.
It is recommended as topcoat for marine vessel accommodation, engine rooms, working spaces in refineries, power plants, bridges, building & mining equipment.
Color : wide range of selection
Packing : 5 L/can; 20 L/pail.
Pioner Topcoat is physically fast drying acrylic coating with semi gloss finish & good gloss retention.
It is to be used as topcoat in atmospheric environments for topside & superstructures.
It has approvals / certificates : Low Flame Spread in accordance with EU Directive for marine Equipment; Parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or IMO FTPC.
Color : wide range selection
Packing : 5 L/can; 20 L/pail.
Reflecting Traffic Paint is a quick drying road marking acrylic paint with glass beads.
It is suitable for both asphalt & concrete surfaces.
It will reflective after abrasives.
Color : white, red, yellow, black
Packing : 3 L/can; 3.785 L/can
Resist 65 is a zinc dust containing, moisture curing inorganic zinc ethyl silicate primer in atmospheric environment with heat resistant up to 540C.
It conforms to the compositional requirements of SSPC Paint 20 Level 3 & complies with ASTM D520 Type II Zinc Dust.
It is suitable for properly prepared carbon steel substrates only in offshore environments, refineries, power plant, bridges, buildings & mining equipment.
Color : grey
Packing : (9+2) L/set
Resist 78 is a zinc dust containing, moisture curing inorganic zinc ethyl silicate primer in atmospheric environment with heat resistant up to 540C.
It conforms to the compositional requirements of SSPC Paint 20 Level 2; ISO 12944-5 & complies with ASTM D520 Type II Zinc Dust.
It is suitable for properly prepared carbon steel substrates only in offshore environments C5I or C5M ISO 12944-2, refineries, power plant, bridges, buildings & mining equipment.
Color : grey
Packing : (9.0+2.6) L/set
Resist 86 is a zinc dust containing, moisture curing inorganic zinc ethyl silicate primer in atmospheric environment with heat resistant up to 540C.
It conforms to the compositional requirements of SSPC Paint 20 Level 1; ISO 12944-5; AS/NZS 3750.15 1994; & complies with ASTM D520 Type II Zinc Dust.
It is suitable for properly prepared carbon steel substrates only in offshore environments C5I or C5M ISO 12944-2, refineries, power plant, bridges, buildings & mining equipment.
Color : grey; greenish grey
Packing : (8.0+2.6) L/set
Safeguard Universal ES is polyamide cured tie coat between epoxy primers & antifouling system.
It can also be used as holding primer for a wide range of topcoats on aluminum, carbon steel, galvanized & stainless steel substrates.
It is recommended for offshore environments, including splash zones, water inlets, cooling pipes, jetties & bridges.
Color : plum
Packing : (15+3) L/set
SeaForce 30 is acrylic, hydrolyzing, self polishing antifouling coating based on ion exchange technology that provides good fouling protection.
It is suitable on approved primers & tie coats on aluminum & carbon steel substrates.
It is for underwater hull in new building & drydocking & designed for vessels trading at a wide range of speed & activity.
This antifouling coating can be used for long service periods of up to 60 months.
It can be used for offshore constructions & outside hull for static installation in deep sea.
Color : dark red, light red, black, blue.
Packing : 20 L/pail
SeaForce Active is acrylic, hydrolyzing, self polishing antifouling coating based on ion exchange technology that provides good fouling protection.
It is suitable on approved primers & tie coats on aluminum & carbon steel substrates.
It is for underwater hull in new building & drydocking & designed for vessels trading at a wide range of speed & activity.
This antifouling coating can be used for long service periods of up to 60 months
It is suited for vessels operating in global service in deep sea trade, including fresh water exposure during new building outfitting.
Color : dark red, light red, black, blue.
Packing : 5 L/can; 20 L/pail.
Solvalitt is physically drying silicone acrylic coating with heat resistant up to 600C.
It can be used as primer, mid coat or finish coat in atmospheric environments for properly prepared carbon steel, galvanized steel, stainless steel & aluminum substrates.
It is suitable for insulated & non insulated surfaces.
Color : red, white, aluminum, others
Packing : 5 L/can
Solvalitt Midterm is physically drying silicone acrylic coating with heat resistant up to 260C.
It can be used as primer, mid coat or finish coat in atmospheric environments for properly prepared carbon steel, galvanized steel, stainless steel & aluminum substrates.
It is suitable for insulated & non insulated surfaces.
Color : red, white, aluminum, others
Packing : 5 L/can
SteelMaster 120SB is one component solvent based acrylic thin film intumescent coating for fire protection of structural steel exposed to cellulosic fire.
It can be used as mid coat or finish coat in atmospheric environments on approved primers on carbon steel structures.
It is suitable for structural steel exposed to internal environments up to corrosivity C4 ISO 12944-2.
Color : white
Packing : 20 L/pail
SteelMaster 1200WF is one component water based acrylic thin film intumescent fireproofing coating for protection against cellulosic fire up to 180 minutes on wide range of I section beams, columns & hollows.
Fire tested & approved to BS 476 Part 20/21.
It can be used as mid coat or finish coat for structural steel exposed to internal environments.
Color : white
Packing : 18.5 L/pail
TankGuard HB is polyamine cured epoxy coating with good chemical resistance & can be used as primer, mid coat or finish coat in atmospheric & immersed environments on properly prepared steel, galvanized steel, stainless steel & concrete substrates.
It is designed as an internal tank coating for grey water, drilling mud, brine & crude oil.
It is in compliance with Federal Drug Authority, USA, FDA Title 21 Part 175.300 exposed to dry & liquid foods.
Color : pink, grey, yellow.
Packing : (16+4) L/set
TankGuard Plus has a high resistance to most sour crude oils and a wide range of chemicals & solvents.
It can be used as primer, mid coat or finish coat in atmospheric and immersed environments for carbon steel, galvanized steel, stainless steel & concrete structures.
It is specially designed as an internal lining for offshore, onshore, buried tanks & pipes, such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines, and drilling mud tanks.
Color : buff, white
Packing : (16.0+4.0) L/set
We supply Jotun Paint, Hardtop XP, Jotamastic 80, Jotun Alkyd Primer, Jotun Alkyd High Gloss, Aluflex, Jotun Resist 78, Jotacote Universal, Jotaprime 510, Marathon, Jotun Pilot, Safeguard Universal ES, Jotaguard, SeaFore Active, Barrier, SteelMaster, intumescent fireproofing coating, Sovalitt, Tankguard Plus, Jotatemp 100 Ceramic, heat resistant 1000 C paint.
Locations we supply to : Jakarta, Bandung, Bogor, Cianjur, Subang,Tasikmalaya, Sukabumi, Cilacap, Tangerang, Serang, Cilegon, Anyer, Merak, Lampung, Padang, Bengkulu, Palembang, Prabumulih, Pekanbaru, Jambi, Dumai, Batam, Medan, Lhokseumawe, Aceh, Bekasi, Karawang, Cikampek, Purwakarta, Purwokerto, Lamongan, Pekalongan, Cirebon, Gresik, Tuban, Malang, Semarang, Surabaya, Madura, Banyuwangi, Denpasar, Bali, Makassar, Balikpapan, Samarinda, Bontang, Samarinda and other towns in Indonesia.
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy