PPG Sigma Paint & Protective coating produces quality protective coating to ensure the structural system has a longer life span and lowers structures maintenance costs. Sectors that use PPG Sigma Paint & Coatings are Marine, Infrastructure, Chemical Processing, Power, Oil & Gas, Offshore and Rail Industry.
Sigma Ecol IV is a classical TBT-free antifouling paint. The paint complies with IMO Antifouling Systems Convention. THe paint controls common types of fouling for periods up to 18-24 months.
Color : Red Brown (Semi-Gloss)
Sigma EcoFleet 290S is a TBT Free Linear Polishing Antifouling Paint. It is a single component TBT-free self-polishing antifouling coating for deep sea going vessels. It complies with IMO Antifouling Systems Convention and has a flat finish.
Color : Red Brown, Brown, Black.
Sigma Vikote 56 is a modified acrylic gloss finish. It is a single component fast-drying modified acrylic finish above the waterline.
Colors : White, Grey, Red, Green, Black.
Sigma Vikote 63 is a high build bituminous coating. One component high build protective coating for steel, concrete and fiber cement with good resistance to sea water & fresh water. It is used to protect void spaces, cofferdams, steel works behind linings and pipes. It has a flat finish.
Color : Black
SigmaCover 246 is a polyamide high build epoxy primer. It contains ywo component polyamide high-build epoxy primer/build coat which contains zinc phosphate. It has good performance on top of zinc silicate primers for the protection of steel structures in atmospheric exposure. It has an eggshell finish.
Color : Red Brown, Cream, Grey.
SigmaCover 300 is a polyamine adduct-cured coal tar epoxy. It has two components of high-build, polyamine adduct-cured, and coal tar epoxy coating. It has outstanding seawater, chemically polluted water, and crude oil resistance. It has an eggshell finsih.
Color : Black, Brown
SigmaCover 280 is an anti-corrosive epoxy primer. It has two components of universal anti-corrosive epoxy primer based on pure epoxy technology. It has good adhesion to steel, galvanized steel, non-ferrous metals, damp cleaned substrates. It is suitable for ballast tanks, decks, topside, superstructure, hull, and cargo oil tanks. It has an eggshell finish.
Color : Yellow, Green
SigmaCover 380 is a universal anti-corrosive epoxy primer. It has two components of universal anti-corrosive epoxy primer suitable for immersion service (ballast tanks, outside shell), decks, topside, superstructure, and hull. It has a eggshell finish.
Color : Green, Grey
SigmaCover 410 is a high-solid high-build polyamide cured epoxy. Its two-component general purpose epoxy build coat for steel and concrete structures exposed to atmospheric land & marine conditions. It has a flat finish.
Color : Wide Range
SigmaCover 435 has micaceous iron oxide-pigmented recoatable epoxy. It has two pack general-purpose build coat or finish epoxy coating resistant to temperature up to 200 C. It has good adhesion on most aged-, sound alkyd-, chlorinated rubber- and epoxy coatings. It has a eggshell finish.
Color : Light Grey, Dark Grey, Green, Aluminum
SigmaCover 456 is a high build polyamide cured recoatable epoxy. It is two-component general-purpose build coat or finish coat in protective coating systems. It can be applied in high relative humidity up to 95%. It jas a semi-gloss finish.
Color : Variety
SigmaCover 510 is a vinyl modified polyamine cured coal tar epoxy. It has two components high build, vinyl modified polyamine cured coat tar epoxy coating formulated as an adhesion coat for antifouling paints. It has an eggshell finsh.
Color : Black
SigmaCover 522 is a micaceous iron oxide-pigmented epoxy. Two component, micaceous iron oxide-pigmented polyamide-cured epoxy primer/sealer/coating for atmospheric or water-immersed exposure conditions. It is an excellent adhesion to, and sealing of, weathered-, cleaned-, zinc-rich primers and metal-sprayed steel. It can resistant to temperatures up to 200C in dry atmospheric exposure conditions. It has a low metallic sheen.
Color : Red Brown, Greenish Grey
SigmaCover 525 is a polyamine cured epoxy tiecoat. Two component epoxy tie coat for an antifouling coat or final coat in underwater anti-corrosive systems. It has a Flat finish.
Color : Black, Grey
SigmaCover 620 is a surface tolerant high build polyamide cured epoxy. Two-component surface tolerant high-build polyamide-cured epoxy primer/coating. It is excellent corrosion resistance, good drying and curing properties. It has an eggshell finish.
Color : Aluminum, Grey, Off-White.
SigmaCover 630 is a surface tolerant high build polyamide cured epoxy. Two-component surface tolerant epoxy primer/coating for a lower grade of steel preparation suitable as maintenance coating of dry cargo holds, decks and hulls. It is compatible with various aged coating and overcoatable with most types of coatings. It has a semi gloss finish.
Color : Green, Grey, Red Brown, Black, Aluminum
Sigmadur 550 is an aliphatic acrylic polyurethane finish. Two component aliphatic acrylic polyurethane gloss finish of excellent color and gloss retention. It is resistant to splashes of mineral and vegetable oils, paraffin, aliphatic petroleum products, and mild chemicals. It has a glossy finish.
Color : Variety
SigmaGlide 790 is a silicone-based tie coat for fouling release systems. Two-component adhesion-promoting tie coat for SigmaGlide finishes. It has a semi-gloss finish.
Color : Medium Grey
SigmaGlide 1290 is a pure silicone binder technology antifouling paint. Two component low slime pick up and easy slime release biocide-free antifouling coating. It has excellent fouling resistance and release performance for a new building, refurbishment, and maintenance. It has a glossy finish.
Color : Dark Red, Dark Blue
SigmaGuard 720 is a reinforced high solids polyamine adduct cured epoxy. Two component reinforced high solid epoxy coating with good chemical resistance against a wide range of chemicals. It is recognized as acorrosion control coating from Lloyd’s Register. It has a glossy finish.
Color : Light Green, Grey
SigmaGuard CSF 650 is a solvent-free amine cured epoxy. Two-component solvent-free amine cured epoxy tank coating for crude oil up to 60 C, ballast and aliphatic petroleum products, drinking water. It meets the requirements of MIL-C-4556E concerning resistance against aircraft fuel and fuel degradation. It is certified to NSF/ANSI Standard 61. It has an eggshell finish.
Color : Green
SigmaLine 2000 is a solvent-free amine-cured phenolic epoxy. Two-component solvent-free amine-cured phenolic epoxy coating that is applied at a substrate temperature of 90 C. It is suitable for pipe externals like bell holing jobs. It is approved by Saudi Aramco APCS 113A and meets the requirements of EN 10289. It has a glossy finish.
Color : Reed Brown
SigmaPrime 200 is a universal anti-corrosive epoxy primer. Two component anti-corrosive epoxy primer of excellent recoatability with good chemical resistance and water resistance. It is suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks, cargo holds, wet blast cleaned substrates, bulk supply, and twin feed application. It has an eggshell finish.
Color : Alu Light, Alu Yellow, Grey, Yellow Green, Red Brown
SigmaRine 24 is a modified zinc phosphate alkyd primer. Single component modified zinc phosphate alkyd primer suitable for superstructures and on steel surfaces above the waterline. It has a flat finish.
Color : Yellow, Brown, Red, Grey, Dark Grey.
SigmaRine 28 is a multi-purpose zinc phosphate primer. Single component surface tolerant, quick-drying, high build, multi-purpose zinc phosphate primer for onboard maintenance above water areas. It has a flat finish.
Color : Grey, Red Brown, Off White
SigmaRine 48 is a general purpose modified alkyd gloss finish. One component general purpose modified alkyd gloss finish suitable for boottop, top side, deck equipment, areas intermittently exposed to water immersion condition. It has a glossy finish.
Color : Variety
SigmaRite 37-G-1 is a temperature indication paint. Single component temperature indication paint that maintains deep green color up to 260 C and changes to white in 3 hours at 400 C. The color change is irreversible, and it has a flat finish.
Color : Green
SigmaShield 460 is a high solids glass flake reinforced polyamine adduct epoxy. Two component high solids glass flake reinforced polyamine adduct epoxy coating with excellent abrasion, corrosion, impact and chemical resistance. It has a gloss finish.
Color : Black.
SigmaTherm 175 is a heat resistant modified alkyd aluminium finish. Single component high brilliancy, heat resistant modified alkyd finish up to 175 C. It has a glossy finish.
Color : Aluminium
SigmaTherm 230 is a heat resistant epoxy phenol novolac coating. Two component epoxy phenol novolac coating with heat resistant up to 230 C & excellent resistant to thermal shock during rapid wet & during cycling. It is suitable as under insulation coating & in cryogenic conditions. It can be applied on hot substrate of temperature up to 150 C. It has an eggshell finish.
Color : Pink, Grey
SigmaTherm 350 is a heat resistant silicone acrylic finish. Single component heat resistant silicone/acrylic finish up to 350 C and is suitable for internal & external protection of steel surfaces. It is widely compatible with inorganic zinc primers. It has a semi-gloss finish.
Color : White, Aluminium
SigmaTherm 500 is a heat resistant modified alkyd aluminium coating. Single component modified alkyd aluminium coating with heat resistant up to 500 C for internal & external protection of steel surfaces. It has an eggshell finish.
Color : Aluminium
SigmaTherm 500 is a heat resistant modified alkyd aluminium coating. Single component moisture curing silicone aluminium with heat resistant up to 540 C. It complies with NACE SP 0198 for austenitic stainless steels and carbon steels under thermal insulation. It has an eggshell finish.
Color : Aluminium, Black
SigmaWeld 120 is a polyamide cured epoxy prefabrication primer. Two component polyamide cured epoxy prefabrication primer suitable for automatic application on shot blasted steel plates. It has fast drying properties, good cutting and welding properties, including MMA and gravity welding. It has a flat finish.
Color : Red Brown
SigmaWeld 199 is a moisture cured zinc ethyl silicate prefabricator primer. Two component moisture cured zinc ethyl silicate prefabrication primer suitable for automatic application on shot blasted steel plates. It has excellent thermal stability minimizes heat damage during hot works procedures. It has a flat finish.
Color : Red Brown
SigmaZinc 9 is a moisture curing zinc ethyl silicate coating. Two component anti-corrosive moisture curing organic zinc silicate coating for structural steel and can withstand substrate temperatures up to 400 C. It has a flat finish.
Color : Grey, Greenish Grey
SigmaZinc 11 is an inorganic zinc silicate coating. One component heavy duty inorganic zinc silicate coating with heat resistance up to 400 C. It has a flat finish.
Color : Grey
SigmaZinc 109HS has high solid polyamide adduct cured zinc rich epoxy primer. Two component quick drying zinc rich epoxy primer that serves as holding primer for various maintenance systems for a total repair. It has a flat finish.
Color : Grey, Reddish Grey
SigmaZinc 158 Moisture Curing Zinc Ethyl Silicate Primer. Two component anti-corrosive zinc silicate primer for structural steel with heat resistant up to 400 C. It has a flat finish.
Color : Grey, Greenish Grey
SigmaZinc 160 is an inorganic zinc ethyl silicate primer. Two component anti corrosive primer for structural steel with galvanic action and heat resistant up to 400 C. It has a flat finish.
Color : Greenish Grey
SteelGuard 550 is an intumescent fire protection coating. One component thin film, solvent borne intumescent coating for cellulosic fire protection of structural steels up to 150 minutes. It has been tested and assessed to International Standards such as BS 476-20/21, UL 263, AS 1530:4, GB 14907 and other requirements. It has a matt finish.
Color : White
Pitt-Char XP is a solvent free thick film fireproofing intumescent coating. It is a highly durable intumescent coating for protection of steel against hydrocarbon and jet fires. It is suitable for offshore structural steel members, bulkheads, decks, onshore pipe works, storage tanks and vessels. It is approved by ABS, BV, DNV, LR, UL and GASAFE. It has a matt finish.
Color : Grey
NovaGurad 840 is a solvent free amine cured novolac phenolic epoxy. Two component solvent free novolac phenolic epoxy coating system with excellent resistant to crude oil up to 120 C, wide ranges of chemicals and solvents. One coat tank coating system for storage of unleaded gasolines. It has a glossy finish.
Color : Green, Cream, Clear
PhenGuard 930 is a high build amine adduct cured novolac phenolic epoxy primer. Two component high build primer coat in the PhenGuard tank coating system with excellent resistance to water, organic acids, alcohols, edible oils, fats and solvents. It has an eggshell finish.
Color : Off White
PhenGuard 940 is a high build amine adduct cured novolac phenolic epoxy finish. Two component finish coat in PhenGuard tank coating system with excellent resistance to a wide range of organic acids, hot water, alcohols, edible oils, fats and solvents. It has an eggshell finish.
Color : Light Grey
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy