These Transcoat paints and Transfloor coating are suitable for tank, boat, ship, floor & structures made of aluminum, fiberglass, GRP-glass reinforced fabric, wood, concrete, timber, stainless steel, bronze, or tin.
Transcoat 95FT is an inorganic zinc rich silicate. The primer has excellent protection for steel structures in offshore, onshore and chemical environments. It is suitable fortank exterior, piping, marine structures above splash zone, structures exposed to heat up to 400 C.
Color : Grey
Gloss Level : Flat
DFT : 65 microns/coat
Transcoat 522 is an alkyd enamel. It is a finish coat for mild industrial service and non-corrosive environment.
Color : Wide Range
Gloss Level : Gloss
DFT : 40 microns/coat
Transcoat 570 is a non-corrosive degreaser. Quick-working cleaner for heavy deposits of oil, grease, alkali or tar from metal, concrete or painted surfaces. Recommended application is by brush. Once grease or tar has been loosened with Transcoat 570, they can be washed away with water. It has better performance than most solvent type cleaners.
Transcoat 662 is a high build polyamide epoxy. High build polyamide cured epoxy coating is resistant to the immersion of petroleum products (motor fuel, jet fuel, diesel oil, and gasoline), salt solution, fresh or demineralized water up to 60 C. It is suitable for fuel tanks & chemical tank linings.
Color : Basic Colors
Gloss Level : Gloss, Satin
DFT : 125 microns/coat
Transcoat 662GL Data Sheet
Transcoat 710ZP is a polyamide cured zinc phosphate epoxy primer. It is a lead & chrome-free inhibitive epoxy primer for aggressive industrial & marine environments. It is suitable for tank exterior, bridges, steel structures in chemical plants & food processing installations.
Color : White, Red
Gloss Level : Flat
DFT : 50 microns/coat
Transcoat 782HB is a high build polyamine coal tar epoxy. It is for tank lining for continuous immersion of crude oil, salt solution, freshwater, brackish water, seawater, and chemically polluted water. It is commonly used in marine structures, piles, hulls & ship bottoms.
Color : Black, Brown
Gloss Level : Satin
DFT : 400 microns/coat
Transcoat 878HR is a heat-resistant silicone resin. Single component silicone resin & aluminum pigmented high-temperature coating up to 600 C. It is suitable for chimney, oven, incinerator & boiler.
Color : Aluminum
Gloss Level : Semi Gloss
DFT : 30 microns/coat
Transcoat 902 HS is a phenolic epoxy finish. High build amine cured phenolic epoxy finish with excellent resistance against corrosive chemical, weather environment, crude oil, fuel oil, solvent & caustic. It is suitable for ship tanks, storage tanks, road tankers in petrochemical industries, and hot water up to 80 C.
Color : White, Grey, Cream
Gloss Level : Flat
DFT : 125 microns/coat
Transcoat 1999 HR is a high-temperature resistant silicone acrylic. Single component silicone acrylic finish coat with heat resistance up to 200 C. It is suitable for chimney, exhaust pipe, heater, boiler & oven.
Color : Aluminum, White, Red, Blue
Gloss Level : Semi Gloss
DFT : 40 microns/coat
Transcoat 2150 is an acrylic primer. It is fast drying acrylic solvent-based primer suitable for interior & exterior surfaces of concrete & steel structures. Can be overlaid with topcoat Acrylic Transcoat 2152 or Alkyd Transcoat 522.
Color : White, Red Oxide
Gloss Level : Satin
DFT : 50 microns/coat
Transcoat 2152 is an acrylic enamel gloss finish. It is fast-drying acrylic solvent-based synthetic gloss enamel finish suitable for interior and exterior surfaces of concrete & steel structures. It is to be applied over Transcoat 2150 Acrylic Primer.
Color : Wide Range;
Gloss Level : Gloss
DFT : microns/coat
Transcoat 2300 is a bituminous HB. Single component modified bituminous coating for steel, concrete & asbestos cement against corrosive seawater, freshwater & humid areas. It is suitable for ballast water tanks, pipes & steel structures.
Color : Black
Gloss Level : Flat
DFT : 125 microns/coat
Transcoat 2450ZP is an alkyd primer. It is an economical, anti-corrosive zinc phosphate alkyd primer suitable for superstructures not immrsed in water.
Color : White, Red
Gloss Level : Flat
DFT : 50 microns/coat
Transcoat 3252 is a coal tar epoxy. It is a high build polyamide cured coal tar epoxy suitable for immersion or splash zones of steel structures, like offshore platforms, drilling rigs, bridges pier, and tank linings. It has good resistant to crude oil, salt solution, freshwater, and sea water.
Color : Black, Brown
Gloss Level : Flat
DFT : 400 microns/coat
Transcoat 3831Mio is a micaceous iron oxide polyamide epoxy. It is a high build polyamide cured epoxy that contains micaceous iron oxide suitable as build coat or finish coat for steel & concrete structures exposed to aggressive atmospheric conditions. It may be top-coated with Transcoat 4502 GL polyurethane for improved gloss & color retention.
Color : Selected Range
Gloss Level : Flat
DFT : 125 microns/coat
Transcoat 3850 is a multi-purpose epoxy. It is a multi-purpose high build polyamide cured epoxy to be used as a rust inhibitive primer or build coat. It is suitable for immersion in salt solution and water up to 60 C.
Color : Wide Range
Gloss Lev el : Flat
DFT : 150 microns/coat
Transcoat 3952 is a polyamine epoxy. It is a high solid polyamide cured epoxy lining for tank lining, steel tank interior, pipelines, and hopper cars. It has good chemical resistance to a wide range of chemicals & immersion of water & fuel.
Color : Wide Range
Gloss Level : Satin
DFT : 125 microns/coat
Transcoat 4000 is a surface tolerant epoxy. It is a self-priming, surface tolerant high solid polyamide cured epoxy coating (epoxy mastic) with good resistance to spillage of various chemicals.
Color : Wide Range
Gloss Level : Semi-Gloss
DFT : 200 microns/coat
Transcoat 4000AL Data Sheet
Transcoat 4000GF Data Sheet
Transcoat 4100T is a waterproof, wet surface & underwater coating. It is a high build solvent-free pigmented epoxy capable of curing underwater, on wet surfaces,s and also at temperatures below 10 C. It provides good protection of metal, concrete & masonry in an extremely aggressive environment. It is suitable for repair / coating on a damp surface, wet surface, splash zone, and underwater, like platform, jetty pier, harbor & bridge structures. It is waterproof in nature and can also be used to repair water leakage in concrete structures.
Color : Greenish Grey
Gloss Level : Flat
DFT : 250 microns/coat
Trancoat 4100T GF Data Sheet
Transcoat 4502GL/S acrylic aliphatic polyurethane topcoat. It is an acrylic aliphatic polyurethane finish coat with excellent gloss & color retention. It has excellent resistant to weather, UV, atmospheric exposure, and abrasion.
Color : Wide Range
Gloss Level : Gloss(GL) /Satin(S)
DFT : 60 microns/coat
Transcoat 4502 GL Data Sheet
Transcoat 4502 GS Data Sheet
Transcoat 5575 HCR is a chemical-resistant epoxy. Topcoat for steel, concrete, and mortar structures with good impact resistance and chemical resistance against spillage of oxidizing acids, bases, solvent, chlorinated hydrocarbons, methanol-gasoline mixtures.
Color : Wide Range
Gloss Level : Gloss/Satin
DFT : 50 microns/coat
Transcoat 5575 HCR HB Gloss Data Sheet
Trans Deco Flat is an exterior acrylic coat. It is a general purpose interior & exterior water based acrylic paint for timber, brick, stone, fiber cement, plaster, cement and concrete surfaces.
Color : Wide Range
Gloss Level : Flat
DFT : 20 microns/coat
Trans Deco Shield is an interior acrylic coat. It is water-based acrylic paint for interior walls & ceiling surfaces such as timber, brick, stone, fiber cement, plasterboard & concrete surfaces in domestic kitchens, bathrooms, laundries, corridors, and other living areas.
Color : Wide Range
Gloss Level : Satin
DFT : 22 microns/coat
Trans Stoving Enamel is a high-performance alkyd/melamine resin with good hardness, adhesion, flexibility, and mar resistance. It is widely used for domestic appliances, office furniture, machinery, steel shelves, etc.
Color : Wide Range
Gloss Level : Gloss, Semi-Gloss, Flat
DFT : 75 microns/coat
Transfloor P100 is a solvent-free epoxy floor primer. It is a self-leveling & solvent-free epoxy polyamine primer for concrete floor or as a mortar undercoat.
Color : Clear
Gloss Level : Gloss
DFT : 100 microns/coat
Transfloor P110 is an epoxy floor primer. It is a high solid, high-performance polyamide epoxy primer for concrete surfaces.
Color : Wide Range
Gloss Level : Flat
DFT : 150 microns/coat
Transfloor T101 is a self-leveling epoxy floor finish. It is a solvent-free polyamine epoxy finish for concrete floors in chemical, pharmaceutical, food, or other industries.
Color : Wide Range
Gloss Level : High Gloss
DFT : 2000 microns/coat
Transfloor T120 is an epoxy floor finish. It is a high solid polyamide epoxy finish for concrete floors with good resistance against abrasion & impact.
Color : Wide Range
Gloss Level : High Gloss
DFT : 150 microns/coat
Transcoat T120 Hardener MSDS Data Sheet
Transcoat T120 Epoxy Floor Finish Data Sheet
Copyright © 2021 PT Findotek - All Rights Reserved.
Powered by GoDaddy